Wire Insulation Remover

The use of artificially stripped flat wire insulation  is time consuming and labor intensive. To this end, we have made a cutting machine that strips the flat wire insulation  layer, which is described below: The flat copper wire with insulating varnish (Fig. 1) is  1mm-40mm. After stripping the insulating  PVC  layer, the bare conductor has a width of 6 mm, a thickness of 3 mm, and a length of 5 to 12 mm. Wire specifications vary depending on the specifications of the electrical components. The structure of the cutting machine is shown in Fig. 2, which is composed of a shield 3, end mills 4 and 6, an adjustment sleeve 5, a clamp 10, and a base 11. Working principle: The motor 1 rotates and drives the release of two end mills. When the milling cutter cuts into the insulating lacquer layer of the wire 9, the wire 9 is fed axially, and the insulating layer is continuously cut until the desired length is reached. Adjusting sleeve 5 is used to change the ends of the flat wire